Cabrinha “Code Red” Wing Foil Package
Includes:
- 2022 Cabrinha 02 Code Wood Wing Board
- Fusion X:Series Hydrofoil
- 2022 Cabrinha 02 X3 Wing
What board size is right for you?
One question on every new winger’s mind is how many liters do I need in my wing board? Will it float me? Can I get away with a smaller size? Can I get one board to learn on that is small enough that I will never want to upgrade? The below chart provides a general framework for sizing your board based on weight and experience.

For more information, make sure to check out the two blog posts below:
Will it Float? A Beginner’s Perspective on Wing Foil Board Size
What Size Wing Foil Board is Right For You?
Which wing size is right for you?
As a general rule, a rider under 150 pounds should start with a wing around 4 square meters. For riders over that weight, a 5 meter wing will be a better place to start. This is very much an average – if you’re riding in lighter winds or want more power, you’ll want to go with a larger wing. If you’re a light weight rider or winging in high winds, you’ll want to go with something smaller.
If this is your second wing and you are looking for consistent, high performance across the whole wind range, it’s smart to separate your wings by 1M increments for most models. That will ensure you are going to have a wing that is properly powered no matter what the wind is reading.
Perhaps you are looking to make each wing maximize its wind range, then a 2m gap works well until you get below 4m. At that point, you’ll want to go to 1m gaps due to the exponential power of wind at higher speeds. Using this method, you’ll have times where you are overpowered or underpowered at times depending on the range of wind and the sail you chose but it will help you maximize your range using fewer wings.
For more information check out these blogs from our Knowledge Center below:
Wing Sizing Broken Down: Which Wing Size and Model Is Right for Me?
3 Things to Consider When Buying a Wing Foiling Hand Wing
Which Foil Is Right For You: X1600 or X1950?
*recommendations are based off learning in 18kts or more

Detailed Package Overview
Wing Board Model and Specs
2022 Cabrinha 02 Code Wood Wing Board
Included with the board: 4pcs m3x30mm mounting bolts, m8 Lockable Tnuts, full deck pad (NOTE: straps sold separately).
Sizes: 4’8″ x 23″ x 4.1″ x 58L / 4’10” x 24″ x 4.4″ x 68L / 5’0″ x 25″ x 4.5″ x 78L / 5’2″ x 26.2″ x 4.6″ x 88L / 5′ 4″ x 27″ x 4.7″ x 98L / 5’8″ x 29.5″ x 5″ x 118L
The fresh new CODE board nods to the fast developing sport of Wingsurfing.
The Code builds off the successful Macro design offering an incredibly fast lifting maneuverable platform to get you up and riding in a flash. Premium materials make for an exceptionally lightweight & durable board that allows direct control from rider through to the foil.
From first starts through to aerial freestyle and wave riding, the Code has been designed with the future of Wingsurfing at the forefront.
FEATURES
- Full premium EVA deck pad
- Carbon Stringer
- Short compact design
- Nose keel to flat section
- Concave Deck. Positive board control when strapless
- Kick tail with release channels for earlier flight and easy pumping
- EPS Core, Light Weight & Buoyant
- Durable Bamboo composite construction
- 3 or 2 strap insert configuration
- 12 inch adjustable foil mount
Foil Details and Specs
- X:Series Front Wing of your choice
- Fusion Hybrid 70cm Base Kit (alloy mast, top plate, hardware, fuselage, & tools)
- Fusion X:Series 220 or 300 Rear Stabilizer
Features
- Increased stiffness between components
- increased efficiency and lift
- integrated fuselage with conical fit
- EPS full prepreg carbon construction
Wing Details and Specs
2022 Cabrinha Crosswing X3 Wing
Already into its 3rd iteration, the Crosswing X3 sets a new standard in efficiency and on-demand power.
Detailed work has been done by Cabrinha’s R&D team into the wing profile and new radial canopy panel layout to achieve our most high-performing and reactive wing to date.
Through an increased leading edge diameter with load distributing center section construction, we have created an exceptionally stiff framework, which is further enhanced by the X3’s innovative double strut. This framework gives the rider the ultimate feeling in efficiency and performance both in the lighter winds, where pumping and efficiency is required, and also in higher winds where stability and control are greatly increased.
Strategic window placements with the combination of the double strut, allow for a wide field of view.
Whether you are boosting to new heights or simply relaxing into your ride, take advantage of all of the X3’s new cutting edge technical attributes.
DESIGN PROFILE
Leading edge inflatable dihedral with powerful profile and “ultra rigid double strut”
FEATURES
- NEW: Ergonomic widespan handle layout for micro adjustment/trim
- NEW: Increased LE diameter with load distributing center section for improved stiffness & canopy tension
- NEW: improved low end
- NEW: HD large diameter closing seam construction
- NEW: Improved balance, linear power delivery and upwind drive
- NEW: Ultra rigid flared Double Strut for aerofoil support and improved response
- NEW: Radial canopy layout for improved response and stiffness
- High tenacity dacron LE
- Sprint inflate valve
- Nano tech ripstop
- Safety wrist leash included
- Kevlar wing tip reinforcement
- Harness line attachment points























Reviews
There are no reviews yet.